Excelsior JET 11.3 Maintenance Pack 1

Excelsior JET 11.3 Maintenance Pack 1 (MP1) is an optional update that fixes multiple customer issues. It incorporates all hotfixes you may have received from Excelsior Technical Support prior to March 01, 2017.

Excelsior JET 11.3 MP1 is a prerequisite for Java SE 8 Update 121 support.

WARNING: Maintenance Packs fix particular problems reported by Excelsior JET users and discovered by Excelsior test engineers after the release of the respective version of the product. They are tested on a representative subset of the test suite used during preparation of the original release. We therefore only recommend you to install Maintenance Packs in the following cases:

  • You have been advised to do so by an Excelsior support engineer;
  • You need to switch to a Java SE (micro)version supported through a Maintenance Pack;
  • You want to try a new technology from Excelsior that requires installation of a particular Maintenance Pack; or
  • You are experiencing a severe problem, such as compiler or application crash or incorrect application behavior.

Release Notes

The most important issues resolved in Excelsior JET 11.3 MP1 are as follows:

  • JET-8967: : Fatal error "Attempt to compile synthetic class file" when compiling Netty, Tomcat 8, Guice, Guava frameworks

Downloads

If you are a registered customer of Excelsior JET 11.3, but have not received a user/password combination for MP1 download, request it from our Support Dept. at support@excelsior-usa.com.

Maintenance Pack 1 + Java SE 8 Update 121 Support (prebuilt profile)
PlatformEditionDownload
Windows
(64-bit)
Enterprisejet-1130-mp1-1.8.0_121p-ent-en-windows-amd64.exe
Professionaljet-1130-mp1-1.8.0_121p-pro-en-windows-amd64.exe
Evaluationjet-1130-mp1-1.8.0_121p-eval-en-windows-amd64.exe
Windows
(32-bit)
Enterprisejet-1130-mp1-1.8.0_121p-ent-en-windows-x86.exe
Professionaljet-1130-mp1-1.8.0_121p-pro-en-windows-x86.exe
Standardjet-1130-mp1-1.8.0_121p-std-en-windows-x86.exe
Evaluationjet-1130-mp1-1.8.0_121p-eval-en-windows-x86.exe
OS X
(64-bit)
Enterprisejet-1130-mp1-1.8.0_121p-ent-en-osx-amd64.bin
Professionaljet-1130-mp1-1.8.0_121p-pro-en-osx-amd64.bin
Evaluationjet-1130-mp1-1.8.0_121p-eval-en-osx-amd64.bin
Linux
(64-bit)
Enterprisejet-1130-mp1-1.8.0_121p-ent-en-linux-amd64.bin
Professionaljet-1130-mp1-1.8.0_121p-pro-en-linux-amd64.bin
Evaluationjet-1130-mp1-1.8.0_121p-eval-en-linux-amd64.bin
Linux
(32-bit)
Enterprisejet-1130-mp1-1.8.0_121p-ent-en-linux-x86.bin
Professionaljet-1130-mp1-1.8.0_121p-pro-en-linux-x86.bin
Standardjet-1130-mp1-1.8.0_121p-std-en-linux-x86.bin
Evaluationjet-1130-mp1-1.8.0_121p-eval-en-linux-x86.bin

Installation Instructions

MP1 installs on top of the original Excelsior JET 11.3, possibly with previous updates applied. If you need to make a fresh installation, install Excelsior JET 11.3 first, cancel JET Setup, and apply MP1.

To update an existing Excelsior JET installation, launch the downloaded executable and follow the on-line prompts. Upon successful copying of Maintenance Pack files, JET Setup will launch automatically and apply the Maintenance Pack.

Profile Management

Installation of MP1 does obsolete your current profiles. You will have to refresh them before you may continue using Excelsior JET. Those profiles are backed up by JET Setup. If you rollback to the previous update level, they will be restored.

The procedure of profile refresh is as follows:

Windows

JET Setup is launched automatically upon a successful installation of MP1. Select the profile that you want refreshed and click Refresh.

OS X / Linux

  1. Run JET Setup to display the list of profiles:

    jetsetup -show-profiles
  2. Locate in the list the outdated profile(s) that you need to refresh and write down their numeric indexes.
  3. For each profile index in your list, run JET Setup as follows:

    jetsetup -refresh-profile profile

    where profile is the profile index.

Update Management

Windows

To rollback to the previous update level, select Manage JET Updates in Excelsior JET Start Menu and click Undo.

Rollback does not remove the installed updates and associated profiles, so you can reapply MP1 later without installing it. Select Manage JET Updates and click Redo until it displays the current configuration as "jet-1130-mp1".

OS X / Linux

  1. Run JET Setup to display the list of installed updates:

    jetsetup -show-updates
  2. Locate in the list the updates which you need to activate. Then run JET Setup again as follows:

    jetsetup -activate-update list

    where list is a colon-separated list of update names.

  3. Display the list of profiles available for the new combination of updates:

    jetsetup -show-profiles
  4. If necessary, create new profiles.

Stay Tuned

To receive notifications about future updates, subscribe to email alerts below, or follow @ExcelsiorJET on Twitter. There is also an RSS Feed.